Table of Contents
Advertisement
New station
Address
Access
Permission
Buttons
Delete
Add
Save
•
Use this field to add a new station to the list. Just enter its address
here, and click the "Add" button.
•
Use the software supplied with your Wireless unit to determine its
address. The address consists of 12 letters (A..F) and digits (0..9)
like this example:
10F810A81091
The address may be shown with separators ( : or - ) between each
pair of characters.
Do NOT enter the separators ( : or - ) in this field.
•
For Wireless Stations listed above
This setting determines what type of access is available to Wire-
less stations whose address has been entered in the "Wireless
Stations" list.
•
For Other Wireless Stations
This setting determines what type of access is available to Wire-
less stations whose address is NOT in the "Wireless Stations" list.
•
For either category, if neither "Internet" nor "LAN" access is
enabled, Wireless stations are unable to use this Access Point.
Delete will delete the selected entry or entries in the list.
Add will add the New Station data to the list.
Save will save the other data on the screen. This has no effect on the
contents of the Wireless Stations list.
Configuration
27
Advertisement
Table of Contents
