Auto Detect - Canon MF247dw User Manual

Dedicated Port Settings
Enable or disable the dedicated port. The dedicated port is used when printing, faxing, or scanning uses MF Scan
Utility and when browsing or specifying the machine settings over the network.
Off
On
<Menu>
Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Wait Time for Connecting to a Network(P. 376)
0 to 300 (sec.)
Ethernet Driver Settings
Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX).
You can also view the MAC address of the machine.

Auto Detect

Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Configuring Ethernet Settings(P. 373)
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type
10BASE-T
100BASE-TX
On
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device.
the MAC Address for Wired LAN(P. 345)
IEEE 802.1X Settings
Enable or disable IEEE 802.1X authentication.
Off
On
Setting Menu List
<Network Settings> <Dedicated Port Settings>
Configuring IEEE 802.1X Authentication(P. 429)
482
Select <Off> or <On>
Setting a
Viewing