Bulb Replacement - BOMBARDIER outlander max series Operator's Manual

Fuses
WARNING
Always turn the ignition switch OFF before
replacing a defective fuse.
If a fuse is damaged, replace it by one of the
same rating.
CAUTION: Do not use a higher rated fuse as
this can cause severe damage.
Fuses are located in the service compart-
ment, behind tool box.
1
V07G26Y
1. Fuse holders
1 4
V07G25Y
1. Accessories (15 A) (power outlet and
auxiliary supply)
2. Fan (20 A)
3. Main (20 A)
4. Charging system (30 A)
To remove fuse from holder, remove the fuse
holder cover then pull fuse out. Check if fila-
ment is melted.
A15E0KY
TYPICAL
1. Fuse
2. Check if melted

Bulb Replacement

Always turn the ignition switch OFF before
replacing a defective bulb.
Always check light operation after replace-
ment.
2 3
WARNING
1
2
129