BOMBARDIER outlander max series Operator's Manual page 94

10) Hazard Warning Button
This button is located on the left side of con-
sole.
V07G24Y
1. Hazard warning button
Device fitted to the vehicle that operates a si-
multaneous flashing of all the direction indica-
tor lamps, used when the vehicle is stationary
to indicate that the vehicle is temporarily ob-
structing traffic.
Press the hazard warning button once to ac-
tivate the device. Press once again to deacti-
vate.
The hazard warning button blinks also when
the hazard warning lights blink.
11) Speedometer
This vehicle is equipped with an electronic
speedometer. It indicates the speed of vehicle
either in MPH or km/h.
The speedometer is located at the middle of
cluster and it backlit every time the ignition
switch is turned ON.
92
1
6
5
4
3
1
V07I1AY
TYPICAL
1. Display selector button
2. Display
3. HI intensity
4. 4WD indicator lamp
5. Engine temperature indicator lamp
6. Oil pressure indicator lamp
7. Neutral position indicator lamp
8. Reverse position indicator lamp
9. Position indicator lamp
10.Direction indicator lamp
Change from One Unit to the Other
The speedometer is factory preset in miles
but it is possible to change it to kilometer read-
ing.
NOTE: The unit modification is applied to the
speedometer, odometer and trip meter.
Turn ignition switch OFF and open the access
panel. Cut locking ties retaining the change
wire to the rectifier harness.
2
V07G19Y
TYPICAL
1. Change wire connectors
2. Fuse holders
7
8
9
10
2
1 2