BOMBARDIER outlander max series Operator's Manual page 132

Headlamps
The headlamp has two bulbs, one headlamp
bulb and one position lamp bulb.
To replace the headlamp bulb, proceed as fol-
lows.
Disconnect the headlamp connector.
NOTE: On the following illustrations, the
headlamp has been removed for a better
comprehension.
Remove the protective rubber sleeve.
V01G1SY
TYPICAL
130
Unlock the bulb socket.
V01G1SY
TYPICAL
Remove the socket snap. Open both sides of
socket snap.
V01G1UY
TYPICAL
Push bulb in and hold while turning counter-
clockwise to release.
Install the new bulb by first pushing in while
turning clockwise.
Install the socket into the headlamp housing.
Align holes in the housing with the socket
slots.