Drive Train; Wheel Bearing Condition - BOMBARDIER outlander max series Operator's Manual

Drive Train

Drive Shaft Boot/Protector
Inspection
Visually inspect drive shaft protectors and
boots conditions. Check protectors for dam-
age or rubbing against shafts. Check boots for
cracks, tears, leaking grease etc. Repair or
replace damaged parts as necessary.
V07H01Y
FRONT OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
2
1
V07H02Y
REAR OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
2
1
2
1
Wheel
Occasionally, wheel nuts should be removed
to apply anti-seize lubricant on studs to ease
future removal. This is particularly important
when vehicle is used in salt-water environ-
ment or in mud. Remove one nut at a time,
lubricate then retorque.

Wheel Bearing Condition

Push and pull the wheels from the upper edge
t o f e e l t h e p l a y. S e e a n a u t h o r i z e d
Bombardier ATV dealer if there is any play.
V07H03Y
133