Steering System; Throttle Cable Lubrication - BOMBARDIER outlander max series Operator's Manual

Wheel Removal
Loosen nuts then lift vehicle. Place a support
under vehicle. Remove nuts then remove
wheel.
At installation, it is recommended to apply
anti-seize lubricant on threads. Gently tighten
nuts in a criss-cross sequence then apply a
final torque of 70 N·m (52 lbf·ft).
1
V07H04Y
1. Taper side of nut
CAUTION: Always use the recommended
wheel nuts (P/N 250 100 039). Using a differ-
ent nut could cause damages to the rim.

Steering System

Throttle Cable Lubrication

Lubrication
The throttle cable must be lubricated with ca-
ble lubricant (P/N 293 600 041) or an equiva-
lent.
WARNING
Always use a silicone-based lubricant. Us-
ing another lubricant (like a water-based lu-
bricant) could cause the throttle lever/cable
sticking or stiffness.
Open the throttle lever housing.
V07I0FY
1. Remove these screws
1
135