Access Panel; Seat Removal - BOMBARDIER outlander max series Operator's Manual

Convertible Rack Removal
– Push the convertible rack latch forward.
This latch is located underneath the rear
end of rack.
1
V07A2UY
1. Convertible rack latch
– Gently lift the rear of rack.
– Pull rack rearwards.
– Continue lifting movement until you can
release the front retaining device then
completely remove convertible rack.
Convertible Rack Installation
– Insert front tabs of rack under frame rods.
– When rack rests in its position, firmly push
rack down to latch.
If the convertible rack rattles during vehicle
operation, do the following:
– Remove the convertible rack.
– Remove the rack location pin.
– Install washer(s) between both location
pins and rack.
– Reinstall convertible rack.
21) Operator's Seat
NOTE: To remove the operator's seat, the
passenger's seat or convertible rack removal
is necessary.

Seat Removal

To remove the operator's seat, push its latch
forward. This latch is located underneath the
rear of seat.
V07L1QY
1. Seat latch
Pull seat rearward. Continue lifting movement
until you can release the front retaining device
then completely remove seat.
1
99