Vehicle Lock; Multi-Function Switch; Headlamp Switch - BOMBARDIER outlander max series Operator's Manual

P: Park
This position locks the transmission to help
prevent vehicle movement. Always use when
the vehicle is not in operation. In some cir-
cumstances, it may be necessary to rock the
vehicle back and forth to move the gears in
the transmission to allow the park to be en-
gaged.
R: Reverse
This allows the vehicle to go backward. The
vehicle speed is limited.
WARNING
Before moving vehicle in reverse, ensure
the path behind is clear of obstacles or by-
standers. Remain seated.
N: Neutral
This position disengages the transmission to
allow manual vehicle movement.
H: High gear
This selects the high speed range of the
transmission in the gear box. It is the normal
driving speed range. It allows the vehicle to
reach its maximum speed.
L: Low gear
This selects the low speed range of the trans-
mission in the gear box. It is the working po-
sition. It allows the vehicle to move slowly with
the maximum traction and power.
NOTE: Use the low speed range to pull any
load or to climb a steep incline.
88

6) Vehicle Lock

Many models of vehicle lock can be used.
P l e a s e , c h e c k w i t h y o u r a u t h o r i z e d
Bombardier ATV dealer to know which model
you must use with your vehicle.

7) Multi-Function Switch

The multi-function switch is located on the left
side of handlebar.
1
V07I19Y
TYPICAL
1. Multi-function switch
The controls located on this multi-function
switch are:

Headlamp Switch

Located on the top of multi-function switch.
Place headlamp switch to LO for the low
beam and brake lamp. Place headlamp
switch to HI for the high beam and brake
lamp.