Operator's Seat - BOMBARDIER outlander max series Operator's Manual

WARNING
Without its passenger's seat, the vehicle
becomes a ONE RIDER ehicle and NO
PASSENGER must be allowed on vehicle.
NEVER carry passenger on convertible
rack.
Passenger's Seat Removal
– Push the passenger's seat latch forward.
This latch is located underneath the rear
end of seat.
V07L1OY
1. Seat latch
– Gently lift the rear of the seat.
– Pull seat rearwards.
– Continue lifting movement until you can
release the front retaining device then
completely remove passenger's seat.
98
1
Passenger's Seat Installation
– Insert front tabs of seat under frame rods.
1
V07L1PY
1. Insert this tab under rod
2. Rod
– When seat rests in its position, firmly push
seat down to latch.
NOTE: A distinctive snap will be felt. Double
check that the seat is secure by giving it a tug
to confirm proper latching.
WARNING
Make sure seat is securely latched before
riding.
2