BOMBARDIER outlander max series Operator's Manual page 127

Select a well-ventilated area and make sure
the muffler is cool.
Place transmission on PARK position.
Remove the clean-out plug of the muffler.
2 1
V07C0BY
1. Clean-out plug
2. Muffler
Block the end of the muffler with a shop rag
and start engine.
Momentarily increase engine RPM several
times to purge accumulated carbon out of the
muffler.
Stop engine and allow muffler to cool.
Reinstall the clean-out plug.
Radiator
Periodically check the radiator area for clean-
liness.
1
V07C0CY
1. Radiator
Inspect radiator fins. They must be clean, free
of mud, dirt, leaves and any other deposit that
would prevent the radiator to cool properly.
Remove as much deposits as you can with
your hands. If water is available in proximity,
try rinsing the radiator fins.
If available, use a garden hose to rinse the
radiator fins.
WARNING
Never clean radiator with your hands when
it is hot. Let the radiator cool down before
cleaning.
CAUTION: Be careful not to damage the ra-
diator fins when cleaning. Do not use any ob-
ject/tool that could damage the fins. The fins
are purposely thin parts to allow efficient cool-
ing. WHEN HOSING, USE LOW PRESSURE
ONLY, NEVER USE A HIGH PRESSURE
WASHER.
See an authorized Bombardier ATV dealer to
check the performance of the cooling system.
125