Grab Handles; Passenger's Seat/Convertible Rack - BOMBARDIER outlander max series Operator's Manual

17) Brake Pedal
Located on the right footrest. When pressed
down, the rear brake is applied. When re-
leased, the brake pedal should return to its
original position. Braking effect is proportional
to the force applied on the pedal and to the
type and condition of the terrain.
NOTE: The brake will have also an effect on
front wheels through the drive train.
The brake pedal applies the rear brake only.
Should the main brake system fail, the rear
brake can be activated by depressing the
brake pedal.
V07K0SY
1. Brake pedal
18) Footpeg
Located on footrest. Use this area to keep
your feet and the passenger's feet stable.
1
V07L1LY
1. Operator's footpeg
2. Passenger's footpeg
1
2

19) Grab Handles

The grab handles are located on each side of
passenger's seat.
V07A2NY
1. Grab handles
2. Passenger's seat
The grab handles must be used by the pas-
senger to hold on firmly during vehicle opera-
tion.
WARNING
Never hold on to the operator. Always hold
the grab handles firmly.
20) Passenger's Seat/Convertible
Rack
WARNING
Never operate the vehivle without passen-
ger's seat or convertible rack properly in-
stalled.
The passenger's seat is designed specially to
allow a secure and pleasant ride at ONE (1)
passenger. The integrated backrest supports
his back during the ride.
The convertible rack is used to convert a two-
rider vehicle to a one-rider vehicle with extra
cargo capacity.
The conversion of the vehicle is easy, remove
the passenger's seat then install the convert-
ible rack or vise versa. Use the procedure de-
scribed below to remove and install the fea-
tures correctly.
2 1
97