Throttle Lever; 2Wd/4Wd Selector; Brake Lever - BOMBARDIER outlander max series Operator's Manual

While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious injury or death.
NOTE: This section gives basic functions of
the various controls of your ATV. For more
details of how to operate one control in con-
junction with some others, refer to OPERAT-
ING INSTRUCTIONS further in this section.

1) Throttle Lever

Located on the right side of handlebar. When
pushed, it increases the engine speed that al-
lows the engagement of the transmission on
the selected gear.
When released, the engine speed should re-
turn automatically to idle and the vehicle will
gradually slow down.
1
V07I01Y
1. Throttle lever
2. To accelerate
3. To decelerate

2) 2WD/4WD Selector

Located on the top of throttle handle, this se-
lector is not functional on the European
Community models.
86
WARNING

3) Brake Lever

Located on the left side of handlebar. When
the brake lever is compressed, the front and
rear brakes are applied. When released, the
brake lever should automatically return to its
original position. Braking effect is proportional
to the force applied on the lever and to the
type and condition of the terrain.
NOTE: As on other wheeled vehicles, the ve-
hicle weight is transferred to the front wheels
when braking. To obtain greater stopping effi-
ciency, the brake system distributes more
braking force to the front wheels. This will af-
fect vehicle handling and steering control
when braking vigorously. Take it into account
when braking.
2
V07K10Y
TYPICAL
3
1. Brake lever
2. To apply brakes
1
2