Table of Contents
Advertisement
3.9.11.
Fitting the Trim
If the appliance is installed at floor level a
three sided trim will be supplied with the
appliance. Follow instructions in Users
section to fit the trim
3.9.12.
The
installer
must
instructions to the user and explain how to
operate this fire, stressing the importance of
having the fire checked and serviced
regularly.
An
recommended.
Important Note:
The first time your appliance reaches operating temperature you will smell the
the paint on the outside of the appliance curing. This is normal. We recommend
that you leave some of the windows in the home open for a few hours during the
first time the fire is run.
Instruct the user to run the fire on full for at least 5 hours continually with the
doors and windows open to allow the appliance to get hot to cure the paint and
seals.
Running for just a short period will not be enough to get the fire to a temperature
that cures the paint and the appliance will continue to smell.
Page 32
Instructing the User
hand
over
these
annual
service
It is mandatory as part of the
gas installation that the installer
instructs the user on the correct
operation and care of their
is
appliance.
Hide quick links:
Advertisement
Table of Contents
