Coal Effect Layout - Magiglo TRIBUTE PD-08-002 User, Installation & Servicing Instructions

3.9.6.

Coal Effect Layout

The fire is supplied with a set of ceramic fuel
set as follows:
Front Ceramic
Rear Ceramic
Moulded Matrix
Proceed with the layout as follows:
1. Position the rear burner ceramic in
position behind the rear burner flange, as
shown in Figure 34.
2. Place the front burner ceramic in its
support in front of the burner as in
Figure 35. Manipulate the rear ceramic
so that the front ceramic slides in easily.
3. Place the moulded coal matrix on top of
the base ceramic so that the front rests
on top of the front ceramic. Manipulate it
so that the contour of the underside of
the coal matrix corresponds to the top of
the front ceramic.
Page 28
Qty
1
1
1
Figure 34 – Rear Ceramic
Figure 35 – Front Ceramic