Magiglo TRIBUTE PD-08-002 User, Installation & Servicing Instructions page 25

14. Slide each of the tensioning screws all
the way onto the cable and through the
hole in the bracket.
15. Whilst holding the cable tensioning
screw in the bracket, pull the cable
taught and without releasing the tension
tighten the thumb screw firmly. To further
tighten the cables, screw the wing nuts
clockwise.
16. Roll up the excess cable and tuck it
away. DO NOT CUT the excess cable.
Bead of fire
cement
Wall Plate
Figure 28
Page 21