Table of Contents
Advertisement
3.9.4.
The Gas Supply
1. The gas supply can be fed into the
firebox from the left hand rear. Care
should be taken to sleeve the pipe when
passing through masonry.
2. Make an appropriate slit in the rubber
grommet and feed the gas supply pipe
through it. Seal gas inlet slot with the
grommet.
3. An isolating valve (with a pressure test
point) has been supplied with this fire to
facilitate isolation of the fire during
Page 26
servicing.
The gas supply to the fire
must be carried out using rigid or semi-
rigid tubing.
4. Connect the outlet of the isolating valve
to the inlet of the control valve on the fire
tray. The outlet on the isolating valve is
the one nearest to the pressure test
point.
Hide quick links:
Advertisement
Table of Contents
