Installation Instructions; General Safety Requirements; General Dimensions - Magiglo TRIBUTE PD-08-002 User, Installation & Servicing Instructions

3. I
NSTALLATION
Before installation, ensure that the local distribution conditions (identification of the
type of gas and pressure) and the adjustment of the appliance are compatible)
3.1.

General Safety Requirements

Before commencing installation, ensure that the intended installation will comply
with details in General Information on Page 1.
The installation of the fire should follow the recommendations of the following
current British Standards (or equivalent):
BS 6891
BS 5440: Pts 1 & 2
IGE/UP/7
Combustible shelves or materials must only be fitted above the fire as described
later in this section.
Ensure that curtains are not positioned above the appliance and there is at least
300mm between the sides of the appliance and any curtains.
3.2.

General Dimensions

I
NSTRUCTIONS
Pipe work Installation
Flues and Ventilation
IGE document for gas installations in Timber
Frame Buildings (Available from Institute of Gas
Engineers and Managers)
Figure 15
Page 11