Pt Programming - Panasonic KX-NT400 Operating Instructions Manual

PT Programming

By using programming mode, you can customize the KX-NT400 beyond the settings that are available on the
Options tab.
You can access programming mode on the Programming screen. In programming mode, most operations
are performed using the Navigator key and dial keys.
To program the KX-NT400 in programming mode
1.
Press the Options tab > Administrator Options > Programming.
2.
On the Programming screen, press PROG.
3.
Enter the input for the feature you want to set, and then press
See "Feature Programming (Page 126)".
4.
Enter the parameters for the feature as necessary.
See "Feature Programming (Page 126)".
5.
Press EXIT to exit.
Note
•
To continue programming other features, repeat the above procedure from step 2.
•
During programming, you can only use the dial keys to enter characters.
•
Pressing P allows you to access buttons normally found on ordinary IP-PTs as hard keys.
Usage tips
•
Once you enter programming mode (step 2 in the above procedure), you can also use the Navigator key
to scroll through the programmable features and to select parameters.
•
You can also access programming mode on the Calls screen or the Feature Key screen (in Call List mode).
For details, see "Calls Screen in Line Buttons Mode (Page 37)" and "Feature Key Screen (Page 55)".
Document Version 2010-01
Customizing the Telephone
(ENTER).
Operating Instructions 125