Removing The Left Door (With Duplex Unit Type) - Canon iR2422 series Service Manual

Chapter 9

9.4.11.2 Removing the Left Door (With Duplex Unit Type)

1) Draw out the drum unit.
2) Remove the rear cover.
3) Remove the left cover (rear).
4) Disconnect the relay harness [2] from the connector [1] of the duplex unit
harness.
5) Disconnect the ground cable [3].
- Screw [4] 1 pc.
6) Remove the reusable band [5] from the duplex unit harness at the rear-left
of the main body, and then return the duplex unit harness [6] to the left
door side.
[5]
7) Release the duplex unit harness [1].
- Screw [2] 1 pc.
- Connector [3] 1 pc.
- Reusable band [4] 1 pc.
- Wire saddle [5] 1 pc.
[3]
[1]
9-18
[3] [4]
[6]
[1]
[2]
F-9-54
[2]
[4] [5]
F-9-55
8) Open the left door until it sops and pull out the hinge shaft [1].
MEMO:
0020-4489
When a duplex unit is installed, remove it before pulling out the hinge shaft
for each access.
[1]
9) Lift the left door with both hands to release it from the door rotation shaft
[1], and then remove the left door.
[1]
F-9-56
F-9-57