3) Lower the separation roller [1] as shown below, and then remove the sep-
aration roller [1] and feed roller [3] by holding the claws [2] of the roller
collars.
[1]
7.5.14 Separation Pad
7.5.14.1 Removing the Separation Pad
1) Open the front cover.
2) Turn the developer pressure release lever clockwise, and then open the left
door.
3) Draw out the drum unit.
4) Remove the transfer registration unit [1].
- Screw [2] 4 pcs.
[1]
5) Remove the feed guide [1].
- Screw [2] 2 pcs.
6) Remove the multi-paper roller.
[3]
[2]
F-7-56
[2]
[2]
F-7-57
[1]
[2]
F-7-58
7) I use a minus screwdriver and remove separation pad [1].
0020-4443
[1]
F-7-59
Chapter 7
7-23