The machine's control panel consists of the following PCBs, and is controlled by the ASIC of the image processor PCB.
The indication on the LCD is in 5 lines (132 x 65 dots).
9.2 Fans
9.2.1 Overview
This machine is provided with a fan to cool the fixing unit.
9.2.2 Fan Control
The fan motor control circuit is shown below.
Switching between full-speed rotation and half-speed rotation is controlled as described below.
1) Full-speed control
When the CPU on the DC controller outputs a fan full speed signal (FAN_FULL), the fan drive voltage switching circuit supplies a +24 V fan drive voltage to turn