Removing The Fan Filter (With Duplex Unit Type) - Canon iR2422 series Service Manual

Chapter 9

9.4.9.2 Removing the Fan Filter (With Duplex Unit Type)

1) Draw out the drum unit.
2) Remove the rear cover.
3) Remove the left cover (rear).
4) Disconnect the relay harness [2] from the connector [1].
5) Disconnect the ground cable [3].
- Screw [4] 1 pc.
6) Remove the reusable band [5] from the duplex unit harness at the rear-left
of the main body, and then return the duplex unit harness [6] to the left
door side.
[5]
7) Rremove the transfer/registration unit [1].
- Screws [2] 4 pcs.
[1]
[2]
9-16
[3] [4]
[6]
[1]
[2]
F-9-45
[2]
F-9-46
8) Remove the duplex unit [1] from the left door.
- Screws [2] 6 pcs.
0020-4483
[2]
[2]
9) Disconnect the connector [1], and then release the harness from the wire
saddle [2].
10) Remove the fixing heart discharge fan [1].
[1] [2]
[2]
F-9-47
[2]
[1]
F-9-48
[1]
F-9-49