Canon iR2422 series Service Manual page 128

Chapter 4
12) Remove the cover [1].
- Screw [2] 1 pc.
13) Remove the two connector [1] and one screw [2] to remove the harness
guide [3]. Remove three screws [4].
[2]
[3]
4-22
[2]
[1]
F-4-43
[4]
[1]
F-4-44
14) Go to the back of the machine, and then disconnect the four connectors
[1] from the reader controller PCB.
15) Remove the harness from the edge saddle/clamp [2].
16) Remove the flexible cable holder [3], and then disconnect the two flexi-
ble cables [4].
17) Remove the two screws [5].
[2]
[5] [2]
18) Remove the flexible cable guide [1].
- Screws [2] 3 pcs.
19) Remove the reader controller PCB [3] together with the mount.
[2]
[3]
[1]
[1] [2] [5]
[1]
[4] [3]
F-4-45
[2]
F-4-46