Canon iR2422 series Service Manual page 86

Chapter 2
6) Attach the heater cover [1].
- Screw [2], 1 pc.
[1]
7) Install the reader heater [1].
- Screw [3], 1 pc.
8) Connect the connector [2] of the heater.
[3] [1]
9) Attach the heater cover [1].
- Screw [2], 1 pc.
[1]
10) Reinstall the parts at the left of the reader.
- Stay (2 screws)
- Jump board (1 scerw)
- Stream reading glass
- Grass holder (2 scerws)
Tighten the screws pressing the glass holder towards the glass.
11) Attach the front cover of the reader.
- Screws, 2 pcs.
12) Install the copyboard glass.
2-32
[2]
F-2-81
[2]
F-2-82
[2]
F-2-83
13) Install the right glass holder of the reader.
- Screws, 2 pcs.
Tighten the screws pressing the glass holder towards the glass.
14) Attach the rear-left cover of the host machine.
- Screws, 3 pcs.
15) Attach the upper-right cover of the host machine.
- Screw, 1 pc.
16) Attach the lower-right cover of the host machine.
- Screws, 5 pcs.
17) Attach the rear cover of the host machine.
- Screws, 4 pcs.