Jam Codes (Related To Adf); Jam Codes (Related To Duplex Unit); Jam Codes (Related To Inner 2-Way Tray) - Canon iR2422 series Service Manual

13.3.3 Jam Codes (Related to ADF)

Code
0000
0007
0008
0009
000a
000c
000d
000e
000f
0010

13.3.4 Jam Codes (Related to Duplex Unit)

0120
0124
0221
0228

13.3.5 Jam Codes (Related to Inner 2-way Tray)

Code
010e
0212
Name Sensor No.
Unknown jam -
Initial stationary PI6,PI7,PI8 Paper is detected in the transport path before the DADF starts initial
Read sensor delay PI7,PI8
Read sensor stationary PI7
Paper absence (Pull out PI11
the document.)
Delivery reversal sensor PI6,PI7
delay
Delivery reversal sensor PI6
stationary
ADF cover open PI10
User ADF open sensor of
the reader
unit
Pickup NG -
Code Name Sensor No.
Delay jam at duplex SR1002
paper sensor 1
Delay jam at duplex SR1003
paper sensor 2
Stationary jam at SR1002
duplex paper sensor 1
Stationary jam at SR1003
duplex paper sensor 2
Name Sensor No.
Delay jam at No.2 SR1101
delivery section
Stationary jam at No.2 SR1101
delivery section
Description
Other errors
operation.
The read sensor does not detect paper when the paper has been fed
by the predetermined distance since reception of a pickup request.
The trailing edge of paper is not detected when the paper has been
fed by the predetermined distance since detection of it by the read
sensor.
The Document set sensor has been held off since start of pickup.
The delivery reversal sensor does not detect paper since the paper
has been fed by the predetermined distance since the read sensor
was turned on.
The trailing edge of paper is not detected when the paper has been
fed by the predetermined distance since the delivery reversal sensor
detected the paper.
The feeder cover was opened during operation (of the drive system).
The ADF was opened during operation (of the drive system).
The registration sensor has been held off since paper pickup started.
Description
The duplex paper sensor 1 does not turn on within the specified
time after the delivery sensor on the main unit side turns on.
The duplex paper sensor 2 does not turn on within the specified
time after the duplex reverse motor starts.
- The duplex paper sensor 1 does not turn off when the specified
time has lapsed since the duplex paper sensor 2 turned on.
- The duplex paper sensor 1 does not turn off when the paper
with a longitudinal length of 280 mm reaches the standby
position (about 90 mm from the duplex paper sensor 2).
The duplex paper sensor 2 does not turn off when the specified
time has lapsed since the feed motor started.
Description
The No.2 delivery sensor does not detect presence of paper within
the specified time after turning on of the fixing delivery sensor.
Absence of paper is not detected within the specified time after
turning on of the No.2 delivery sensor.
Chapter 13
0020-4326
0020-4327
0020-4328
13-5