Scan Setting; Adjust; Cis Position Adjust - Canon iR2422 series Service Manual

Chapter 14
Title Item
Service's

Scan Setting

Choice
Printer
Setting

Adjust

CIS Position
Adjust
Reading
Adjust
Print
Position
14-2
Sub item Initial setting
Define LGL Size Legal
Define LTR Size LTR
Define LTR-R Size LTR-R
Shading Value-R 272
Shading Value-G 272
Shading Value-B 272
BitSwitch14 All off
BitSwitch15 All off
Fuser Temp.-Bypass 6
Fuser Temp.-Tray1 6
Fuser Temp.-Tray2 6
Fuser Temp.-Tray3 6
Fuser Temp.-Tray4 6
Film Speed-Bypass 15
Film Speed-Tray 15
Define U1 Paper Size G-LTR
Define U2 Paper Size Foolscap
Define U3 Paper Size G-LGL
Print Test-Page -
Print Test-Interval -
B4-Large/Small Small
EUR:Operator
call, Other
country/
region:Service
Waste Toner Full call
Shading Position 22
Sheet Position 385
Book Main Regist 35
Book Sub Regist 115
Book Mian Zoom 16
Book Sub Zoom 16
Motor Phase2-1(CW) 474
Motor Phase2-1(CCW) 474
ADF Main Regist 35
ADF Sub Regist-DES 220
ADF Sub Regist-Copy 24
ADF Main Zoom 16
ADF Sub Zoom 16
ADF Motor Zoom 16
Top-Bypass 50
Top-Tray 50
Top-Duplex 50
Left-Bypass 100
Left-Tray1 100
Left-Tray2 100
Left-Tray3 100
Left-Tray4 100
Left-Duplex 100
Range of setting Function
Legal, Foolscap, M-Officio,
A-Foolscap, Folio, G-Legal,
A-Officio, B-Officio, ADF special paper, standardized size: LGL
Officio, E-Officio misidentification-ready
ADF special paper, standardized size: LTR
LTR, G-LTR, A-LTR misidentification-ready
LTR-R, Foolscap, Officio,
E-Officio, G-LTR-R, A- ADF special paper, standardized size: LTR_R
LTR-R misidentification-ready
0 to 511 shading target value (red)
0 to 511 shading target value (green)
0 to 511 shading target value (blue)
On, Off Special mode setting
On, Off Delivery setting
0 to 12, 1 unit = 5 deg C Target fixing temperature adjustment (multi)
0 to 12, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 1)
0 to 12, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 2)
0 to 12, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 3)
0 to 12, 1 unit = 5 deg C Target fixing temperature adjustment (cassette 4)
Fixing film speed adjustment (manual paper feed
0 to 30, 1 unit = 0.4% tray)
0 to 30, 1 unit = 0.4% Fixing film speed adjustment (cassette)
Paper size group U1 special, standard-size paper
A-LTR, G-LTR, 8K entry
Foolscap, Officio, E-Officio,
B-Officio, A-Officio, M- Paper size group U2 special, standard-size paper
Officio, 16K entry
A-Foolscap, A-LTR-R, G-
LTR-R, G-LGL, Folio, Paper size group U3 special, standard-size paper
16KR entry
- Not used.
- Not used.
Large, Small Counter function setting
Operator call, Service call Waste toner full display setting
Distance from the standby position of CIS to the
6 to 48, one unit=0.1mm shading start point.
300 to 450, one unit=0.1mm CIS scan position during ADF scanning.
0 to 70, one unit=0.1mm Vertical scan start position adjustment
50 to 150, one unit=0.1mm Horizontal scan start position adjustment
0 to 32, one unit=0.1% Horizontal scan magnification correction
0 to 32, one unit=0.1% Vertical scan magnification correction
0 to 999, one
unit=0.0001mm Adjust motor speed (CW)
0 to 999, one
unit=0.0001mm Adjust motor speed (CCW)
0 to 70, one unit=0.1mm Adjust ADF horizontal scanning start position
170 to 270, one unit=0.1mm Adjust ADF vertical scan start position from DES
Adjust ADF vertical scan start position from DES
0 to 200, one unit=0.1mm (Copy)
0 to 32, one unit=0.1% Adjust ADF horizontal Magnification correction
0 to 32, one unit=0.1% Adjust ADF vertical scan end position
0 to 32, one unit=0.1% Adjust ADF motor magnification correction
Top registration adjustment (manual paper feed
0 to 100, one unit=0.1mm tray)
0 to 100, one unit=0.1mm Top registration adjustment (cassette)
0 to 100, one unit=0.1mm Top registration adjustment (duplex unit)
Left-end registration adjustment (manual paper feed
0 to 200, one unit=0.1mm tray)
0 to 200, one unit=0.1mm Left-end registration adjustment (cassette 1)
0 to 200, one unit=0.1mm Left-end registration adjustment (cassette 2)
0 to 200, one unit=0.1mm Left-end registration adjustment (cassette 3)
0 to 200, one unit=0.1mm Left-end registration adjustment (cassette 4)
0 to 200, one unit=0.1mm Left-end registration adjustment (duplex unit)