Control System Configuration (When The Original Size Detection Sensor Is Not Equipped For Book Mode) - Canon iR2422 series Service Manual

Chapter 4
The control system configuration of the original exposure system is shown below.
[4] [5]
[6]
[3]
[2]
[7]
[1]
[8]
[13]
[12]
[9]
[11]
[10]
F-4-3
[1] Printer main body (Connected to the image processor PCB)
[2] Connected to ADF
[3] Connected to the power supply PCB
[4] Reader motor drive control
[5] Reader motor (M401)
[6] Reader controller PCB
[7] Original sensor (horizontal scan direction)
[8] Original sensor (vertical scan direction)
[9] Contact image sensor
[10] Image signal
[11] CISHP sensor (PS503)
[12] Copyboard cover open/close sensor (Front: SR403)
[13] Copyboard cover open/close sensor (Front: SR402)

4.1.6 Control System Configuration (When the original size detection sensor is not equipped for BOOK mode)

0020-4224
4-5