Before Starting The Work (230V Cspl) - Canon iR2422 series Service Manual

2.1.6 Before Starting the Work (230V CSPL)

1-1 Points to Make Before Installation
Be sure to go through the following before starting the work:
1) If you are installing the machine after moving it from a cold to warm location, be sure to leave the machine unpacked for at least 2 hours so that the machine is
fully used to the site temperature, thus avoiding image faults caused by condensation. (The term "condensation" refers to the formation of droplets of water on
the surface of a metal object brought in from a cold to warm place, i.e., as the result of the rapid cooling of the moisture (vapor) around the object.)
2) The machine weighs a maximum of about 37.9 kg. Be sure to work in a group of 2 persons when lifting it.
3) The machine is manufactured considering that it would be connected to IT Power Distribution System in Norway.
1-2 Checking the Contents
Check to be sure that none of the following contents is missing:
[1] Drum unit
[2] Power cable
Check the documentation and CD against the following table:
1-3 Names of Parts
[11]
[10]
[9]
[8]
[7]
[1] Copyboard cover
[2] Reader front cover
[3] Control panel
[4] Delivery tray
[5] Front cover
[6] Cassette 1
[7] Left cover (front)
[1]
A3 A4 A4 A5
B5 B5 LGL 11 17
LTR STMT 8K 16K
[3]
---1
---1
Driver/Utility CD-ROM
User Manual CD-ROM
Operators manual: Users Guide
Operators manual: Easy Operation Guide
[1]
[2]
B4
Set the size detector lever to the
new paper size.
LTR
Placer I'indicateur de format sur
le nouveau format.
Bitte stellen Sie den Hebel zum
Erkennen des Papierformats auf
das neue Format ein.
FU5-xxxx
[4]
F-2-11
[3] Cassette size label
[4] Caution sheet
[2]
[12]
[3]
[4]
[5]
[16]
[6]
F-2-12
[9] Left door
[10] Left cover (rear)
[11] Reader left cover
[12] Reader right cover
[13] Reader rear cover
[14] Rear cover
[15] Right cover (upper)
Chapter 2
---1
---1
[13]
[14]
[15]
0020-4251
2-9