Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 89

error.
E746-
Hardware error (TPM)
0031
E746- Error which the system recovery
0032 is not possible occurs (TPM)
E746- Error occurs, but system
recovery is possible (TPM)
0033
E746- Error occurs, but auto recovery
0034 of system is possible (TPM)
Main Controller PCB access
E748- error
2000 Main Controller PCB Chip
access error.
Main Controller PCB access
E748- error
2001 Main Controller PCB memory
access error.
Code
E748-
Flash board error
2010
E748-
Flash board error
2011
E748-
Flash board error
2012
E748-
Main controller board 2 access errors
2021
E748-
Main controller board 2 access errors
2023
E748-
Main controller board 2 access errors
2024
E748-
Main Controller PCB 2 error
4910
E748-
System error
9000
89
Description
The TPM PCB is not installed, the TPM
PCB for other model is installed, or failure
of TPM Chip.
Location of security information in
HDD/SRAM is unknown. Execute"Initialize
All Data/Settings".
Mismatch of key. Execute restoration of the
TPM key.
Mismatch of key occurs. However,
recovery by restart is possible. Turn OFF
and then ON the power.
Replace the Main Controller PCB 1/2.
1. Remove and then reinstall the DDR2-
SDRAM(M0/M1/P). 2. Replace the Main
Controller PCB 1/2.
Remedy
Contact to the sales companies
Contact to the sales companies
Contact to the sales companies
Main controller board 1/2 removing and
inserting, replacement
DDR2-SDRAM (M0/M1/P) removing
and inserting, replacement
Main controller board 1/2 removing and
inserting, replacement
Replace the Main Controller PCB 2.
Contact to the sales companies