Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 56

Error in Relay PCB connection
detection
E197- Connection between the DC
0004 Controller PCB (PCB1) and the
Relay PCB (PCB5) is
disconnected.
Error in Main Driver PCB Analog
Connector connection detection
E197- Connection between the DC
0005 Controller PCB (PCB1) and the
Main Driver PCB (PCB2) is
disconnected.
Error in Feed Driver PCB
Drawer Connector connection
detection
E197-
Connection between the DC
0006
Controller PCB (PCB1) and the
Feed Driver PCB (PCB3) is
disconnected.
Error in Fixing Drawer
Connector connection detection
E197- Connection between the DC
Controller PCB (PCB1) and the
0008
Main Driver PCB (PCB2) is
disconnected.
Error in the Process Unit
connection detection
E197-
Connection between the Main
0009
Driver PCB (PCB2) and the
Process Unit is disconnected.
Error in Primary Charging High
Voltage PCB connection
detection
E197-
Connection between the Main
0010
Driver PCB (PCB2) and the
Primary Charging High Voltage
PCB (PCB11) is disconnected.
56
Driver side (12V to 1pin, 5V to 3pin, 3.3V to
4pin). -> If not, replace the DC-DC Converter
PCB. 4. Replace the Duplex Driver PCB
(PCB4). 5. Replace the DC Controller PCB
(PCB1).
1. Check the connection of the DC Controller
PCB (PCB1) and the Relay PCB (PCB5). DC
Controller side: J451, Relay side: J514 2.
Replace the Relay PCB (PCB5). 3. Replace
the DC Controller PCB (PCB1).
1. Check the connection of the DC Controller
PCB (PCB1) and the Main Driver PCB
(PCB2). DC Controller side: J413, Main Driver
side: J124 2. Replace the Main Driver PCB
(PCB2). 3. Replace the DC Controller PCB
(PCB1).
1. Check the connection between the DC
Controller PCB (PCB1) and the Fixing Feed
Drawer. DC Controller side: J431, J432, Fixing
Feed Drawer (host machine side): J3002D
Fixing Feed Drawer (Fixing Feed side):
J3002L, Feed Driver side: J300, J301 2.
Replace the Feed Driver PCB (PCB3). 3.
Replace the DC Controller PCB (PCB1).
1. Check the connection between the Main
Driver PCB (PCB2) and the Fixing Drawer.
Main Driver side: J105, Fixing Drawer (host
machine side): J3001D Check the Harness of
the Fixing Drawer (Fixing side) (J3001L). 2.
Replace the Main Driver PCB (PCB2).
1. Check the connection between the Main
Driver PCB (PCB2) and the Process Unit. PCB
side: J107, Process Unit side: J3060 2.
Replace the Process Unit.
1. Check the connection between the Main
Driver PCB (PCB2) and the Primary Charging
High Voltage PCB (PCB11). Main Driver side:
J111, Primary Charging High Voltage side:
J3501 2. Replace the Primary Charging High
Voltage PCB (PCB11).