Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 86

ode
Third party PDL communication error
E730-
Communication error with the print
9004
server.
Third party PDL communication error
E730-
Error in video cable connection with the
9005
print server.
PDL communication error
E730- No reply from PDL. Due to failure of
A006 Subbootable, or no existence, there is
no reply from PDL.
Mismatched PDL version
Version of the host machine control
E730-
A007 software and version of PDL control
software are different.
E730- PDL embedded font error
B013 Font data is corrupted.
E732- Reader communication error
Negotiation failure.
0000
E732- Reader communication error
0001 Communication error.
Reader communication error
E732- Unable to detect Vsync from the Reader
0010 Controller although 2 minutes have
passed after the completion of register
86
Description Remedy
1. Turn OFF and then ON the
power. 2. Check the cable
connection. 3. Replace the Open
I/F PCB, F Link PCB (Main/Sub). 4.
Replace the Main Controller PCB.
1. Turn OFF and then ON the
power. 2. Check the cable
connection. 3. Replace the Open
I/F PCB, F Link PCB (Main/Sub). 4.
Replace the Main Controller PCB.
1. PDL reset processing. 2. Turn
OFF and then ON the power. 3.
Check the connection of the Main
Controller PCB. 4. Reinstall the
firmware. 5. Replace the Main
Controller PCB.
1. PDL reset processing. 2. Turn
OFF and then ON the power. 3.
System All Format and installation.
1. Turn OFF and then ON the
power. 2. Reinstall the system. 3.
System All Format and installation.
1. Check the connection of the
Connector with the Reader. 2.
Check the power of the Reader
(check if the initialization operation
is executed at startup). 3. Replace
the Reader Controller PCB and the
Main Controller PCB.
1. Check the connection of the
Connector with the Reader. 2.
Check the power of the Reader
(check if the initialization operation
is executed at startup). 3. Replace
the Reader Controller PCB and the
Main Controller PCB.
1. Check the connection of the
Connector with the Reader. 2.
Check the power of the Reader
(check if the initialization operation