Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 69

detects the paper surface during paper
surface detection operation. 2. A
discontinuous area is detected during tray
operation. 3. During evacuation operation,
arrival at the area beyond the Tray 2
Paper Surface Sensor 2 is detected
before this Sensor detects paper surface.
The Tray 2 Shift Motor clock error
(Finisher-E1)
E542-
The FG input cannot be detected when
8004
the Tray 2 Shift Motor has been driven for
0.2 second.
The Tray 2 Shift Motor speed error
(Finisher-E1)
E542-
The lock detection signal turns OFF 150
8005
msec after the lock detection signal
turned ON.
The Tray 2 Shift Motor acceleration error
(Finisher-E1)
E542-
The lock detection signal does not turn
8006
ON when the Tray 2 Shift Motor has been
driven for 1 second.
The Tray 2 Shift Motor error (Finisher-E1)
The lock detection signal does not turn
E542-
8007 OFF when the Tray 2 Shift Motor is at a
stop.
Error in the Power Supply Fan of the
E551- Insertion Unit
0011 The loch signal is detected for the
specified times while the fan operates.
Error in the Power Supply Fan of the
E551-
Paper Folding Unit
0021
The loch signal is detected for the
69
Shift Motor is faulty. 3. The tray
up/down mechanism is faulty. 4. The
Tray 2 Shift Motor (M105) is faulty. 5.
The Finisher Controller PCB is faulty.
1. The Tray 2 Shift Area Sensor PCB
is faulty. 2. The wiring between the
Finisher Controller PCB and Tray 2
Shift Motor is faulty. 3. The tray
up/down mechanism is faulty. 4. The
Tray 2 Shift Motor (M105) is faulty. 5.
The Finisher Controller PCB is faulty.
1. The Tray 2 Shift Area Sensor PCB
is faulty. 2. The wiring between the
Finisher Controller PCB and Tray 2
Shift Motor is faulty. 3. The tray
up/down mechanism is faulty. 4. The
Tray 2 Shift Motor (M105) is faulty. 5.
The Finisher Controller PCB is faulty.
1. The Tray 2 Shift Area Sensor PCB
is faulty. 2. The wiring between the
Finisher Controller PCB and Tray 2
Shift Motor is faulty. 3. The tray
up/down mechanism is faulty. 4. The
Tray 2 Shift Motor (M105) is faulty. 5.
The Finisher Controller PCB is faulty.
1. The Tray 2 Shift Area Sensor PCB
is faulty. 2. The wiring between the
Finisher Controller PCB and Tray 2
Shift Motor is faulty. 3. The tray
up/down mechanism is faulty. 4. The
Tray 2 Shift Motor (M105) is faulty. 5.
The Finisher Controller PCB is faulty.
1. The connector of the Fan (F1) is
disconnected. 2. The wiring of the
Fan (F1) is faulty. 3. The Fan (F1) is
faulty. 4. The Insertion Unit Controller
PCB is faulty.
1. The connector of the Fan (F1) is
disconnected. 2. The wiring of the
Fan (F1) is faulty. 3. The Fan (F1) is