Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 26

driven forward for 0.5 sec.
Stitcher (front) home position
error
E5F5- The stitching home position
8002 sensor does not turn OFF when
the stitch motor (front) has been
driven backward for 0.5 sec.
Paper pushing plate home
position error
The paper pushing plate home
E5F6-
position sensor does not turn ON
8001
when the paper pushing plate
motor has been driven for 0.5
sec. 0.5 sec.
Code Description
Paper pushing plate home position
error
The paper pushing plate home
E5F6-
position sensor does not turn OFF
8002
when the paper pushing plate
motor has been driven for 150 ms.
0.5 sec.
Paper pushing plate motor clock
error
E5F6-
The number of pulses detected by
8003
the paper pushing plate motor clock
sensor is 6 pulses or less.
Pushing position error
The paper pushing plate leading
E5F6-
edge position sensor does not turn
8004
ON when the paper pushing plate
motor has been driven for 0.1 sec.
E5F6- Pushing position error
26
1. The stitcher home position sensor (front)
(SW7) is faulty. 2. The stitcher (front) is
faulty. 3. The saddle stitcher controller
PCB is faulty.
1. The paper pushing plate home position
sensor (PI14), paper pushing plate top
position sensor (PI15), and paper pushing
plate motor clock sensor (PI1) is faulty. 2.
The paper pushing plate drive mechanism
is faulty. 3. The paper pushing plate motor
(M8) is faulty.
1. The paper pushing plate home
position sensor (PI14), paper pushing
plate top position sensor (PI15), and
paper pushing plate motor clock sensor
(PI1) is faulty. 2. The paper pushing
plate drive mechanism is faulty. 3. The
paper pushing plate motor (M8) is faulty.
1. The paper pushing plate home
position sensor (PI14), paper pushing
plate top position sensor (PI15), and
paper pushing plate motor clock sensor
(PI1) is faulty. 2. The paper pushing
plate drive mechanism is faulty. 3. The
paper pushing plate motor (M8) is faulty.
4. The saddle stitcher controller PCB is
faulty.
1. The paper pushing plate home
position sensor (PI14), paper pushing
plate top position sensor (PI15), and
paper pushing plate motor clock sensor
(PI1) is faulty. 2. The paper pushing
plate drive mechanism is faulty. 3. The
paper pushing plate motor (M8) is faulty.
4. The saddle stitcher controller PCB is
faulty.
1. The paper pushing plate home
Remedy