Download Print this page

Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 79

Hide thumbs Also See for imageRUNNER ADVANCE 4045:

Advertisement

Paper Pushing Plate Motor
has been driven for 150
msec.
Paper Pushing Plate Motor
clock error (Finisher-E1)
E5F6-
The number of pulses
8003
detected by the Paper
Pushing Plate Motor Clock
Sensor is 6 pulses or less.
Pushing position error
(Finisher-E1)
The Paper Pushing Plate
E5F6-
Leading Edge Position
8004
Sensor does not turn ON
when the Paper Pushing
Plate Motor has been driven
for 0.1 sec.
Code
Description
Pushing position error
(Finisher-E1)
The Paper Pushing Plate
E5F6-
Leading Edge Position Sensor
8005
does not turn OFF when the
Paper Pushing Plate Motor has
been driven for 0.5 sec.
Hard disk error
E602
Insufficient memory
E604-
Insufficient memory (require
1024
1024 MB).
Hard disk error
Temperature of the HDD does
E609-
not rise to the specified
0008
temperature within the specified
period of time at the time of
startup.
Hard disk error
E609-
At the time of recovery from
0009
sleep, it does not reach to the
79
Pushing Plate Motor (M8) is faulty. 4. The Saddle
Stitcher Controller PCB is faulty.
1. The Paper Pushing Plate Home Position
Sensor (PI14), Paper Pushing Plate Top Position
Sensor (PI15), and Paper Pushing Plate Motor
Clock Sensor (PI1) is faulty. 2. The paper pushing
plate drive mechanism is faulty. 3. The Paper
Pushing Plate Motor (M8) is faulty. 4. The Saddle
Stitcher Controller PCB is faulty.
1. The Paper Pushing Plate Home Position
Sensor (PI14), Paper Pushing Plate Top Position
Sensor (PI15), and Paper Pushing Plate Motor
Clock Sensor (PI1) is faulty. 2. The paper pushing
plate drive mechanism is faulty. 3. The Paper
Pushing Plate Motor (M8) is faulty. 4. The Saddle
Stitcher Controller PCB is faulty.
1. The Paper Pushing Plate Home Position
Sensor (PI14), Paper Pushing Plate Top
Position Sensor (PI15), and Paper Pushing
Plate Motor Clock Sensor (PI1) is faulty. 2. The
paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is
faulty. 4. The Saddle Stitcher Controller PCB is
faulty.
See Service manual
DDR2-SDRAM
HDD.
HDD.
Remedy

Advertisement

loading