Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 36
Hide thumbs
Also See for imageRUNNER ADVANCE 4045:
- Basic operation manual (180 pages) ,
- Operating manual (56 pages) ,
- Specifications (12 pages)
Advertisement
When lock signal failed to be
detected for 15 sec while the
Exhaust Fan (Rear) (FM3) is
driven. * The same condition is
detected after the error retry is
performed.
Failure of the Exhaust Fan (Front)
(FM4)
When lock signal is detected for 15
E805-
sec while the Exhaust Fan (Front)
0002
(FM4) is stopped. * The same
condition is detected after the error
retry is performed.
Unstable rotation of the Exhaust
Fan (Front) (FM4)
When lock signal failed to be
detected for 15 sec while the
E805-
0003
Exhaust Fan (Front) (FM4) is
driven. * The same condition is
detected after the error retry is
performed.
Failure of the Main Body Cooling
Fan (FM6)
When lock signal is detected for 5
E806-
sec while the Main Body Cooling
0000
Fan (FM6) is stopped. *The same
condition is detected after the error
retry is performed.
Unstable rotation of the Main Body
Cooling Fan (FM6
When lock signal failed to be
E806-
detected for 15 sec while the Main
0001
Body Cooling Fan (FM6) is driven. *
The same condition is detected
after the error retry is performed.
Failure of the Paper Cooling Fan
(FM7)
When lock signal is detected for 15
E806-
sec while the Paper Cooling Fan
0002
(FM7) is stopped. *The same
condition is detected after the error
retry is performed.
E806- Unstable rotation of the Paper
36
Exhaust Fan (Rear) (FM3). 3. Replace the
DC Controller PCB (UN2).
1. Check connection of the Connectors
(J2009/J2501/J206). 2. Replace the
Exhaust Fan (Front) (FM4). 3. Replace the
DC Controller PCB (UN2).
1. Check connection of the Connectors
(J2009/J2501/J206). 2. Replace the
Exhaust Fan (Front) (FAN4). 3. Replace
the DC Controller PCB (UN2).
1. Check connection of the Connectors
(J2210/J222). 2. Replace the Main Body
Cooling Fan (FM6). 3. Replace the DC
Controller PCB (UN2)
1. Check connection of the Connectors
(J2210/J222). 2. Replace the Main Body
Cooling Fan (FM6). 3. Replace the DC
Controller PCB (UN2).
1. Check connection of the Connectors
(J2209/J2509/J206). 2. Replace the Paper
Cooling Fan (FM7). 3. Replace the DC
Controller PCB (UN2).
1. Check connection of the Connectors
Advertisement
