Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 25

Position Sensor does not change
although the Paper Fold Motor is
driven for a specified period of
time.
Guide home position error
The guide home position sensor
E5F2-
does not turn ON when the guide
8001
motor has been driven for 700
pulses.
Guide home position error
The guide home position sensor
E5F2-
does not turn OFF when the
8002
guide motor has been driven for
50 pulses.
Aligning plate home position
error
E5F3- The aligning plate home position
8001 sensor does not turn ON when
the aligning plate motor has
been driven for 500 pulses.
Aligning plate home position
error
E5F3- The aligning plate home position
8002 sensor does not turn OFF when
the aligning plate motor has
been driven for 50 pulses.
Stitcher (rear) home position
error
E5F4- The stitching home position
sensor does not turn ON when
8001
the stitch motor (rear) has been
driven backward for 0.5 sec.
Stitcher (rear) home position
error
E5F4- The stitching home position
8002 sensor does not turn OFF when
the stitch motor (rear) has been
driven forward for 0.5 sec.
Stitcher (front) home position
error
E5F5-
The stitching home position
8001
sensor does not turn ON when
the stitch motor (front) has been
25
roller drive mechanism is faulty. 3. The
paper folding motor (M2) is faulty. 4. The
saddle stitcher controller PCB is faulty.
1. The guide home position sensor (PI13)
is faulty. 2. The guide plate drive
mechanism is faulty. 3. The guide Motor
(M3) is faulty. 4. The saddle stitcher
controller PCB is faulty.
1. The guide home position sensor (PI13)
is faulty. 2. The guide plate drive
mechanism is faulty. 3. The guide Motor
(M3) is faulty. 4. The saddle stitcher
controller PCB is faulty.
1. The aligning plate home position sensor
(PI5) is faulty. 2. The aligning plate drive
mechanism is faulty. 3. The aligning motor
(M5) is faulty. 4. The saddle stitcher
controller PCB is faulty.
1. The aligning plate home position sensor
(PI5) is faulty. 2. The aligning plate drive
mechanism is faulty. 3. The aligning motor
(M5) is faulty. 4. The saddle stitcher
controller PCB is faulty.
1. The stitcher home position sensor (rear)
(SW5) is faulty. 2. The stitcher (rear) is
faulty. 3. The saddle stitcher controller
PCB is faulty
1. The stitcher home position sensor (rear)
(SW5) is faulty. 2. The stitcher (rear) is
faulty. 3. The saddle stitcher controller
PCB is faulty.
1. The stitcher home position sensor (front)
(SW7) is faulty. 2. The stitcher (front) is
faulty. 3. The saddle stitcher controller
PCB is faulty.