Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 21

Punch home position error
The puncher does not detect
the punch home position
E590-
8001 sensor when the puncher
motor has been driven for 20
msec.
Punch home position error
After the motor has been
E590- stopped at time of punch
8002 motor initialization, the
puncher does not detect
punch home position sensor.
Scrap full detection error
The voltage of the light
received is 3.0 V or less even
E591-
when the light emitting duty of
8001
the scrap full detector sensor
has been increased to 66% or
more.
Scrap full detection error
The voltage of the light
E591- received is 2.0 V or more even
8002 when the light emitting duty of
the scrap full detector sensor
has been decreased to 0%.
Horizontal registration sensor
1 error
The voltage of the light
received is 2.5 V or less even
E592
when the light emitting duty of
8003
the horizontal registration
sensor 1 (LED1,PTR1) has
been increased to 66% or
more
Trailing edge sensor error
The voltage of the light
received is 3.0 V or less even
E592-
when the light emitting duty of
8001
the trailing edge sensor
(LED5,PTR5) has been
increased to 66% or more.
21
1. The punch home position sensor and punch
motor clock sensor is faulty. 2. The wiring
between the punch controller PCB and sensor is
faulty. 3. The punch mechanism is faulty. 4. The
puncher motor is faulty. 5. The punch controller
PCB is faulty. 6. The finisher controller PCB is
faulty.
1. The punch home position sensor and punch
motor clock sensor is faulty. 2. The wiring
between the punch controller PCB and sensor is
faulty. 3. The punch mechanism is faulty. 4. The
puncher motor is faulty. 5. The punch controller
PCB is faulty. 6. The finisher controller PCB is
faulty.
1. The wiring between the scrap full detector
PCB and punch controller PCB is faulty. 2. The
scrap full detector PCB is faulty. 3. The punch
controller PCB is faulty. 4. The finisher controller
PCB is faulty."
1. The scrap full detector PCB is faulty. 2. The
punch controller PCB is faulty. 3. The finisher
controller PCB is faulty.
1. The wiring between the LED
PCB/photosensor PCB and punch controller
PCB is faulty. 2. The LED PCB and photosensor
PCB is faulty. 3. The punch controller PCB is
faulty. 4. The finisher controller PCB is faulty.
1. The wiring between the LED
PCB/photosensor PCB and punch controller
PCB is faulty. 2. The LED PCB and photosensor
PCB is faulty. 3. The punch controller PCB is
faulty. 4. The finisher controller PCB is faulty."