Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 50

Pre-transfer Charging Shutter HP
close error.
E066- The Pre-transfer Charging Shutter
0002 Sensor (PS95) detects that the
shutter is closed although it is
moved to the open position.
50
(relay), J114 (Main Driver PCB (PCB2)) 1-B.
In the case that the Pre-transfer Charging
Shutter is stopped at rear side (close
operation position) 1-B-1. Check that the
Primary Fan Duct is closed. Close the
Primary Fan Duct. 1-B-2. Check movement
of the pin to push the Pre-transfer Charging
Shutter Sensor (PS95). Replace the Pin. 1-
B-3. Check movement of the flag on the Pre-
transfer Charging Shutter Sensor (PS95).
Replace the flag/ spring. 1-B-4. Check the
connection of the Pre-transfer Charging
Shutter Sensor (PS95). Sensor side: J2114,
J3215 (relay), J3067 (relay) PCB side:
J3066 (relay), J130 (Main Driver PCB
(PCB2)) 1-C. In the case that the Pre-
transfer Charging Shutter is stopped along
the way 1-C-1. Check abrasion of the Slider
Pin. Replace the Slider Pin. 1-C-2. Replace
the Pre-transfer Charging Assembly. 2.
Replace the DC Controller PCB (PCB1).
1. Check the position of the Pre-transfer
Charging Shutter. 1-A. In the case that the
Pre-transfer Charging Shutter fails to
operate (stopped at HP at front side) Check
the connection of the Pre-transfer Charging
Wire Cleaning Motor (M7). Sensor side:
J3108, J3089 (relay), PCB side: J3088
(relay), J114 (Main Driver PCB (PCB2)) 1-B.
In the case that the Pre-transfer Charging
Shutter is stopped at rear side (close
operation position) 1-B-1. Check that the
Primary Fan Duct is closed. Close the
Primary Fan Duct. 1-B-2. Check movement
of the pin to push the Pre-transfer Charging
Shutter Sensor (PS95). Replace the Pin. 1-
B-3. Check movement of the flag on the Pre-
transfer Charging Shutter Sensor (PS95).
Replace the flag/ spring. 1-B-4. Check the
connection of the Pre-transfer Charging
Shutter Sensor (PS95). Sensor side: J2114,
J3215 (relay), J3067 (relay) PCB side:
J3066 (relay), J130 (Main Driver PCB
(PCB2)) 1-C. In the case that the Pre-
transfer Charging Shutter is stopped along