Canon imageRUNNER ADVANCE 4045 Trouble Error Codes List page 91

Image Exhaust Fan (FM3) is turned
ON.
Fixing Power Supply error
E808- Detected 145V (100V/120V
0001 model)/290V (230V model) or higher
inlet voltage at power-on.
Fixing Power Supply error
E808- Detected 75 V (100V/120V model)/150
0002 V (230V model) or higher inlet voltage
at power-on.
Code Description
Fixing Power Supply error
Inlet current is 1A or lower
E808-
for 1 second or longer
0003
although the maximum
voltage is output.
Fixing Power Supply error
E808- Detected OFF with 12V of
0004 the Main Driver PCB (PCB2)
output.
12V OFF detection when
relay is turned ON
E808- Detected OFF with 12V of
0005 the Fixing Power Supply
output after IH relay is
turned ON.
E808-
ASIC error
0006
Fixing Power Supply error
E808-
Inlet voltage and the IH
0007
Power Supply ID are not
91
1. Check the outlet voltage. -> Connect
to the correct outlet. 2. Check the
connection between the Main Driver
PCB (PCB2) and the Fixing Power
Supply PCB (PCB10). 3. Replace the
Fixing Power Supply PCB (PCB10). 4.
Replace the Main Driver PCB (PCB2).
1. Check the outlet voltage. -> Connect
to the correct outlet. 2. Check the
connection between the Main Driver
PCB (PCB2) and the Fixing Power
Supply PCB (PCB10). 3. Replace the
Fixing Power Supply PCB (PCB10). 4.
Replace the Main Driver PCB (PCB2).
1. Check the clogging of the Fixing Power Supply
Cooling Fan (FM7). 2. Check the clogging of the
Louver on right side of the host machine (Multi-
purpose Tray side). 3. Check the connection of the
Fixing Power Supply PCB (PCB10) Output
Connector. 4. Replace the Fixing Power Supply
PCB (PCB10).
Replace the Main Driver PCB (PCB2).
1. Check the conduction of the Fixing Thermal
Switch 1/2 (TP1/2). 2. Check the drawer between
the Fixing Assembly and the host machine. 3.
Check the connection between the Main Driver
PCB (PCB2) and the Fixing Power Supply PCB
(PCB10). 4. Replace the Fixing Power Supply
Unit. 5. Replace the Main Driver PCB (PCB2).
Replace the DC Controller PCB (PCB1).
Check the connection between the Main Driver
PCB (PCB2) and the Fixing Power Supply PCB
(PCB10). Replace the Fixing Power Supply PCB
Remedy