Telnet Configuration - Nortel BayStack 410 24T Using Manual

TELNET Configuration

The TELNET Configuration screen
with the BayStack 410-24T switch from a remote console terminal. You can have
up to four active TELNET sessions at one time.
Choose TELNET Configuration (or press t) from the main menu to open the
TELNET Configuration screen.
Allowed Source IP Address
-------------------------
[ 0.0.0.0 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-42. TELNET Configuration Screen
Table 3-36
309985-B Rev 00
TELNET Configuration
TELNET Access:
Login Timeout:
Login Retries:
Inactivity Timeout:
Event Logging:
describes the TELNET Configuration screen fields.
Using the Console Interface
(Figure 3-42) allows you to communicate
[ Enabled ]
[ 1 minute ]
[ 3 ]
[ 15 minutes ]
[ All ]
Allowed Source Mask
-------------------------
[ 0.0.0.0 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
[ 255.255.255.255 ]
Press Ctrl-C to return to Main Menu.
3-99