Nortel BayStack 410 24T Using Manual page 33

10base-t switch
Table of Contents

Advertisement

Table 1-1.
BayStack 410-24T Switch LED Descriptions
Label
Type
CAS Up
Stack mode
CAS Dwn Stack mode
Base
Base mode
309985-B Rev 00
Color
State
Meaning
Off
The switch is in standalone mode.
Green
On
The switch is connected to the upstream unit's Cascade A
In connector.
Yellow
On
The Cascade A Out connector (CAS Up) for this switch is
looped internally (wrapped to the secondary ring).
Yellow
Blinking Incompatible software revision or unable to obtain a unit
or
ID (Renumber Stack Unit table full). The unit is on the ring
Green
but cannot participate in the stack configuration.
Off
The switch is in standalone mode.
Green
On
The switch is connected to the downstream unit's
Cascade A Out connector.
Yellow
On
The Cascade A In connector (CAS Dwn) for this switch is
looped internally (wrapped to the secondary ring).
Yellow
Blinking Incompatible software revision or unable to obtain a unit
or
ID (Renumber Stack Unit table full). The unit is on the ring
Green
but cannot participate in the stack configuration.
Green
On
The switch is configured as the stack base unit.
Off
The switch is not configured as the stack base unit (or is
in standalone mode).
Blinking Stack configuration error: Indicates that multiple base
units or no base units are configured in the stack.
Yellow
On
This unit is operating as the stack configuration's
temporary base unit. This condition occurs automatically
if the base unit (directly downstream from this unit) fails.
If this happens, the following events take place:
Introduction to the BayStack 410-24T Switch
(continued)
The two units directly upstream and directly
downstream from the failed unit automatically wrap
their cascade connectors and indicate this condition
by lighting their Cas Up and Cas Dwn LEDs (see Cas
Up and Cas Dwn description in this table).
If the temporary base unit fails, the next unit directly
downstream from this unit becomes the new
temporary base unit. This process can continue until
there are only two units left in the stack configuration.
(continued)
1-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Baystack 410-24t

Table of Contents