Nortel BayStack 410 24T Using Manual page 133

In-Band Stack IP Address:
In-Band Switch IP Address: [ 0.0.0.0 ]
In-Band Subnet Mask:
Default Gateway:
IP Address to Ping:
Start Ping:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 2-14. IP Configuration/Setup Screen (Standalone Switch)
4.
5.
6.
Proceed to Chapter 3, "Using the Console Interface," for detailed descriptions of
the menus and screens you can use to customize your configuration.
309985-B Rev 00
IP Configuration/Setup
BootP Request Mode:
Configurable
-------------------
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ No ]
Enter the IP address of the switch in the In-Band IP Address field, then
press [Return].
Note: When the IP address is entered in the In-Band IP Address field, and
the In-Band Subnet Mask field is not present, the software provides an
in-use default value for the In-Band Subnet Mask field, based on the class
of the entered IP address.
Enter the IP subnet mask address in the In-Band Subnet Mask field, then
press [Return].
Enter the default gateway address in the Default Gateway field, then
press [Return].
Installing the BayStack 410-24T Switch
[ BootP Disabled
In Use
---------------
0.0.0.0
0.0.0.0
Press Ctrl-C to return to Main Menu.
]
Last BootP
---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
2-19