System Characteristics - Nortel BayStack 410 24T Using Manual

System Characteristics

The System Characteristics screen
characteristics and contains three user-configurable fields: sysContact, sysName,
and sysLocation.
Choose System Characteristics (or press s) from the main menu to open the
System Characteristics screen.
System Characteristics
Operation Mode:
Size Of Stack:
Base Unit:
MAC Address:
Reset Count:
Last Reset Type:
Power Status:
Local MDA Type:
sysDescr:
sysObjectID:
sysUpTime:
sysServices:
sysContact:
sysName:
sysLocation:
Enter text, press <Return> or <Enter> when complete.
Press Ctrl-R to return to previous menu.
Figure 3-5. System Characteristics Screen
Table 3-4
309985-B Rev 00
Stack, Unit # 2
4
1
00-00-00-00-00-00
51
Power Cycle
Primary Power
4 port 10Base-T/100Base-TX with Autosense, 400-4TX MDA
BayStack 410-24T HW:Revx
1.3.6.1.4.1.45.3.35.1
00:06:26
3
[ Mario Lento ]
[ Publications ]
[ Building 12, Floor 20 ]
describes the System Characteristics screen fields.
Using the Console Interface
(Figure 3-5) allows you to view system
FW:Vx.xx SW:vx.x.x.xx ISVN:x
Press Ctrl-C to return to Main Menu.
3-15