Nortel BayStack 410 24T Using Manual page 196

Using the BayStack 410-24T 10BASE-T Switch
Use arrow keys to highlight option, press <Return> or <Enter> to select option.
Press Ctrl-R to return to previous menu.
Figure 3-24. MultiLink Trunk Configuration Menu Screen
Table 3-21
Table 3-21. MultiLink Trunk Configuration Menu Screen Options
Option
MultiLink Trunk
Configuration...
MultiLink Trunk
Utilization...
Return to Switch
Configuration Menu
3-58
MultiLink Trunk Configuration Menu
MultiLink Trunk Configuration...
MultiLink Trunk Utilization...
Return to Switch Configuration Menu
describes the MultiLink Trunk Configuration Menu screen options.
Description
Displays the MultiLink Trunk Configuration screen
allows you to configure up to six MultiLink trunks within a standalone switch or
within a stack configuration. You can group up to four switch ports together to
form each trunk.
Displays the MultiLink Trunk Utilization screen
This screen allows you to monitor the bandwidth utilization of the configured
trunks.
Exits the MultiLink Trunk Configuration Menu screen and displays the Switch
Configuration Menu screen.
Press Ctrl-C to return to Main Menu.
(Figure
(Figure 3-26
3-25). This screen
and Figure 3-27).
309985-B Rev 00