Vlan Workgroup Summary; Figure 1-29. Vlan Port Configuration Screen Example - Nortel BayStack 410 24T Using Manual

Unit:
Port:
Filter Tagged Frames:
Filter Untagged Frames:
Filter Unregistered Frames:
Port Name:
PVID:
Port Priority:
Tagging:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-29. VLAN Port Configuration Screen Example

VLAN Workgroup Summary

This section summarizes the VLAN workgroup examples discussed in the
previous sections of this chapter.
As shown in
with multiple VLANs:
•
•
•
Because switch S4 does not support 802.1Q tagging, a single switch port on each
switch must be used for each VLAN (see
Switches" on
309985-B Rev 00
VLAN Port Configuration
Figure 1-30, switch S1 (a BayStack 410-24T switch) is configured
Ports 1, 6, 11, and 12 are in VLAN 1.
Ports 2, 3, 4, 7, and 10 are in VLAN 2.
Port 8 is in VLAN 3.
page 1-42).
Introduction to the BayStack 410-24T Switch
[ 1 ]
[ 8 ]
[ No ]
[ No ]
[ No ]
[ Molly's port ]
[ 3 ]
[ 0 ]
[ Untagged Access ]
Press Ctrl-C to return to Main Menu.
"VLANs Spanning Multiple Untagged
1-49