Nortel BayStack 410 24T Using Manual page 168

Using the BayStack 410-24T 10BASE-T Switch
Table 3-9. MAC Address Security Port Configuration Screen Fields
Field
Unit
Port
Trunk
Security
3-30
Description
Allows you to select the unit number (when stacking is configured) to view or
configure. To view or configure another unit, type its unit number and press
[Enter], or press the spacebar to toggle the unit numbers.
Indicates the switch port numbers that correspond to the field values in that
row of the screen (for example, the field values in row 2 apply to switch port 2).
The values that you set in the Switch row will affect all switch ports and, when
the switch is part of a stack, the values that you set in the Stack row will affect
all ports in the entire stack.
The read-only data displayed in this column indicates the MultiLink Trunks that
correspond to the switch ports specified in the Trunk Members fields of the
Trunk Configuration screen.
Allows you to enable or disable the MAC address security for the specified
port.
Default Disabled
Range Disabled, Enabled
309985-B Rev 00