Configuring Port Mirroring; Figure C-5. Configuring Port Mirroring (1 - Nortel BayStack 410 24T Using Manual

Using the BayStack 410-24T 10BASE-T Switch

Configuring Port Mirroring

To create or modify port-mirroring ports, follow the flowcharts in
Figures
Choose Port Mirroring Configuration (or press i) from the Switch Configuration
Menu screen to open the Port Mirroring Configuration screen.
Figure C-5.
C-6
C-5 and C-6.
Port Mirroring
Configuration screen
Is
No
Monitoring Mode
field set?
Yes
Is
No
Monitor Port
field set?
Yes
Is
No
Monitor Port
set for port-based
mode?
Yes
Are
No
Ports X and Y fields
configured?
Yes
1
Configuring Port Mirroring (1 of 2)
Set Monitoring Mode field
Set Monitor Port field (see
"Port Mirroring Configuration Rules").
1
Configure Ports X and Y fields (see
"Port Mirroring Configuration Rules").
2
Key
Off-page reference
On-page reference
BS41053A
309985-B Rev 00