Nortel BayStack 410 24T Using Manual page 75

Ports 2, 4, 6, 8, 10, and 11 are now untagged members of VLAN 3 as shown in
Figure 1-25
Create VLAN:
Delete VLAN:
VLAN Name:
Management VLAN: [ Yes ]
1-6
------
Unit #1 -U-U-U
KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 1-27. VLAN Configuration Screen Example
To configure the PVID (port VLAN identifier) for Port 8:
1.
2.
The VLAN Port Configuration screen settings shown in
settings.
309985-B Rev 00
on page 1-45.
VLAN Configuration
[ 3 ]
[ ]
[ Mary's VLAN ]
Port Membership
7-12
------
-U-UU-
From the VLAN Configuration screen, press [Ctrl]-R to return to the
VLAN Configuration Menu.
From the VLAN Configuration Menu, select VLAN Port Configuration
(or press c).
The default VLAN Port Configuration screen opens
Introduction to the BayStack 410-24T Switch
VLAN Type:
Protocol Id (PID): [
User-Defined PID:
VLAN State:
Press Ctrl-C to return to Main Menu.
[ Port-Based
None
[ 0x0000 ]
[ Active
(Figure 1-28).
Figure 1-28 are default
]
]
]
1-47