Installing The Baystack 410-24T Switch In A Rack - Nortel BayStack 410 24T Using Manual

10base-t switch
Table of Contents

Advertisement

Using the BayStack 410-24T 10BASE-T Switch
The BayStack 410-24T switch can be mounted onto any appropriate flat, level
surface that can safely support the weight of the switch and its attached cables, as
long as there is adequate space around the unit for ventilation and access to cable
connectors.
To install the switch on a tabletop, shelf, or any other flat surface:
Set the switch on the flat surface and check for proper ventilation.
1.
Allow at least 2 inches (5.1 cm) on each side for proper ventilation and
5 inches (12.7 cm) at the back for power cord clearance.
Attach rubber feet to each marked location on the bottom of the chassis.
2.
The rubber feet are optional but recommended to keep the unit from slipping.
Attach all devices to the ports.
3.
See

Installing the BayStack 410-24T Switch in a Rack

Caution: When mounting this device in a rack, do not stack units directly on
top of one another in the rack. Each unit must be secured to the rack with
appropriate mounting brackets. Mounting brackets are not designed to support
multiple units.
Achtung: Wenn Sie dieses Gerät in einem Gerätegestell installieren, stellen
Sie die Geräte nicht direkt aufeinander. Jedes Gerät muß mit entsprechenden
Halterungen im Gestell befestigt werden. Die Halterungen sind nicht dafür
konzipiert, mehrere Geräte zu tragen.
Attention: Si cet appareil doit être encastré dans un rack, ne jamais empiler
directement plusieurs unités les unes sur les autres. Chaque unité doit être
correctement fixée avec les membrures appropriées. Les membrures ne sont
pas conçues pour supporter le poids d'unités multiples.
Precaución: Al montar este dispositivo apilado con otros dispositivos, no
apile las unidades directamente unas sobre otras. Cada unidad se debe fijar a la
estructura mediante los soportes de montaje adecuados. Los soportes de
montaje no están diseñados para soportar varias unidades.
2-4
"Attaching Devices to the BayStack 410-24T
Switch" on
page
2-7.
309985-B Rev 00

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Baystack 410-24t

Table of Contents